iDesign
iDesign
Create a print image
No print images can be created on the Markoprint X4JET controller itself.
Print images can be created and processed with the iDesign software stored on the USB
stick. For this purpose, this must be installed on a commercially available PC (follow the
enclosed iDesign operating instructions).
The diagram below shows the operating surface of the iDesign software.
Save
Cascade
Create
label
arrangement
new label
Open existing
Save label
label
as
Add text
Add
counter
Add date
/ time
Arrangement
Add
on
top
of
variable
each other
Seite 112 von 177
Add
Delete
Move pixel
barcode
by pixel
selection
Turn
Ink
Add logo /
selection
consumption
picture
through
calculator
90°
72800115 Markoprint X4JET
Fig. 43: User interface iDesign
GB