Select Print Image - Weber Markoprint integra PP108 Operating Manual

Operation

Select print image

Up to nine print images can be saved in the memory of the Markoprint integra PP108 or
a direct call up at the system unit.
Instruction
Please select a print image as follows:
Step
1
2
3
4
5
Procedure
To select the saved print image, ranks third, press the [SELECT]-Button
three times short.
To confirm the text selection pressing the [ON-/OFF]-Button within 5
seconds.
After pressing the [ON-/OFF]-Button, the selected text is confirmed with the
flashing STATUS LED. I.e. if text 3 is selected, the STATUS LED flashes
three times.
The print images 1.00J to 9.00J can selected for printing in this way.
If only three print images are loaded and the print image 5 is selected, the
STATUS LED flashes three times and print image 3 is loaded.
Page 62 of 104
40075165 Markoprint integra PP108
Fig. 25: SELECT-BUTTON on the top of the system
Fig. 26: ON-/OFF-BUTTON on the top of the system
Fig. 27: Status-LED on the top of the system
GB