Table of Contents
Advertisement
2.5
Safe cleaning and maintenance
Observe the following points for cleaning and maintenance. Electrical equipment may only
by cleaned and maintained by qualified personnel. Act according to the safety instructions
given. Observe the applicable regional standards and regulations. Failure to follow safety
instructions may result in hazardous situations that could cause death or serious injury.
Safety at the work site
When working on roads, construction sites and in public areas, ensure safety in line with local
requirements and regulations.
To perform the work properly, you need to observe:
• Legal specifications
• On-site safety requirements
• Road traffic conditions
Note the following:
• Secure the working area in accordance with the "Guidelines for the safety of workstations
on roads" or similar regional regulations.
• Use appropriate cordoning equipment where necessary.
• Always wear a safety vest when working in the area of road traffic.
• Provide for adequate space in the working area. The working area should be at least 8
meters in diameter.
• Comply with the valid building regulations for parking spaces for electric cars including
charging stations.
Cleaning
Protect the environment by using biodegradable cleaning agents to clean the surfaces. Clean
the surfaces of the charging station with a damp cloth.
Do not use steam jets or water jets for cleaning, as they may cause moisture to infiltrate the
charging station. Moisture inside the charging station poses a risk of electric shock.
Failure to follow these instructions may result in hazardous situations that could cause death
or serious injury.
SICHARGE Operating Instructions MID
Operating Instructions, 07/2020, A5E48573001-AB
Safety information
2.5 Safe cleaning and maintenance
15
Hide quick links:
Advertisement
Table of Contents
