Options Available For Orders - Siemens SICHARGE CC AC22-MID Operating Instructions Manual

Appendix
A.3 Options available for orders
A.3

Options available for orders

Option overview
These extensions can be optionally ordered for the SICHARGE CC AC22 .
Options and accessories
Permanently installed type 2
charging cable at both ends
SCHUKO socket on both sides of
each charge point
HAK building junction box
SICHARGE CC AC22
Mounting plate with anchors
Overvoltage protection
Integration of a backend system
Configuration and communica-
tion test
Customer-specific color tone
Full foiling
Partial foiling
Last Gasp function
100
Description
Instead of charge point sockets, spiral charging cables type 2, in-
cluding holder, are installed. (Approx. +10 kg)
A SCHUKO socket type D, E, or F is also installed at each charge
point. At this charge point, energy can be obtained via the
SCHUKO socket or via the type 2 connection.
Add-on module for the back of the SICHARGE CC AC22. Allows
power connection directly from the utility company. Can be used
for up to two charging stations.
Stainless steel plate with foundation anchors for pouring into the
foundation (not included). This simplifies alignment and mount-
ing.
Internal additional module, arrester type 1 + type 2 according to
EN 61643-1, spark gap technology with follow-on current limita-
tion, defect display, trip message via OCPP, protection level <= 1.5
kV. Lightning current impulse (10/350): 50 kA, energy coordina-
tion according to DIN EN 62305-4
If required, SICHARGE CC AC22 can be connected to any backend
acc. to OCPP 1.6 already at the factory. We also configure and test
the connection of previously unconnected backends for you.
Every SICHARGE CC AC22 is fully tested at the factory. Optionally,
customer-specific configurations including SIM card and communi-
cation tests to the backend can be performed for you.
The standard color is RAL 9006. A large number of other colors are
available on request.
Customer-specific foiling of the four sides of the
SICHARGE CC AC22 in accordance with the foiling plan. Use of UV-
resistant foil in 4-color printing, applied directly in the factory.
Same as full foiling, but only approx. 50% of the total area
Internal add-on module, allows you to unlock the charging cable
and an alarm to the backend in the event of power failure
Operating Instructions, 07/2020, A5E48573001-AB
SICHARGE Operating Instructions MID