Maintenance; General Exterior Maintenance; General External Checks - Siemens VersiCharge AC Installation And Operation Manual

Electric vehicle charging station

Hide thumbs Also See for VersiCharge AC:

Table of Contents

VersiCharge™ AC Installation and Operations Manual

SECTION 9

Maintenance

While there is no maintenance for the internal works of the VersiCharge, the exterior does require some basic,

common-sense maintenance. The following maintenance can be performed by the owner/user. All other service

must be conducted by qualified personnel.

If there is any damage to the charger, contact your supplier.

General exterior maintenance is recommended to be performed every six months, depending on the

environment. In harsh environments, maintenance should be performed more often.

Regular cleaning is recommended to avoid accumulation of debris/dust/dirt on or around the unit. Wipe

surfaces with a soft cloth dampened with water, or for harder to remove marks, use an alcohol-based cleaner.

Do not spray with high pressure cleaning hoses or use abrasive chemicals.

Check for cuts, damage and debris. If debris is present, remove it. If you find damage, contact your supplier.

Check for damage and corrosion. If present, contact your supplier.

Check the HMI for damage/signs of faded color that is clearly visible.

Ensure there is no debris or damage inside or around the cable, cable holder and connector/plug. If present,

remove debris and/or notify the supplier of any damage. Check the connector/plug pins for any signs of

corrosion and contact the supplier if there is any damage to the pins.

Check for snow buildup around the VersiCharge and clear the area around the VersiCharge. This should be

checked daily in areas with high snowfall.

Table of Contents