Siemens SICHARGE CC AC22-MID Operating Instructions Manual page 66

Status indicators
The following table provides an overview of status indicators of charging points:
SICHARGE Operating Instructions MID
Operating Instructions, 07/2020, A5E48573001-AB
Does not light up If the status indicator does not light up, this indicates an
interruption to the power supply. If there is not a power
failure, check the backup fuses.
Lights up white The controller is deactivated. The charge point is not availa-
ble.
Flashing white Controller has been started. The charge point is not available
at the moment.
Lights up green Charging of vehicles is possible.
Flashes green No cable plugged in. Charging point is signing charging
process.
Lights up yellow The charging point is connected to the vehicle.
No charging in progress.
Pulsating blue light Charging process active:
The connected vehicle is receiving power.
Lights up blue Charging inactive:
The connected vehicle is not drawing any power.
Flashing blue Meter data for the charging process are being signed.
Flashes red 1x
•
•
•
Flashes red 2x Contactor error
Flashes red 3x Circuit breaker (CB) has tripped
Flashes red 4x The residual current circuit breaker (RCCB) has tripped
Flashes red 5x Connector lock error
Flashes red 6x Meter error
Flashes red 7x Vehicle error: Mode 3 unknown status
EVSE connection error
EV connection error
Excess temperature
Operation
6.1 Status indicators
65