Install The Ultraglide Hydraulic System - Raven AutoBoom Installation Manual

UltraGlide Wiring Kit (P/N 117-0137-024)
TABLE 4.

Install the UltraGlide Hydraulic System

Manual No. 016-0230-050
Cable - Harness
Cable - Power/CAN Controller
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material from being
introduced into the machine's hydraulic system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will reduce
performance and possibly cause damage to the
AutoBoom hydraulic valve.
The appearance of the AutoBoom hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
115-0230-045
115-0230-007
WARNING
CAUTION
NOTICE
UltraGlide
1
1
29