Buttons - Dräger Isolette 8000 plus Instructions For Use Manual

Operating concept
C
D
5.4

Buttons

The functions of the 4 buttons located next to the screen are indicated by the labels
shown on the screen beside each key. The buttons enable the user to select
parameter and menu items at the various displays.
Use the display selection key to switch between display 1 and display 2.
5.4.1 Display 1 buttons
A
B
C
D
42
The Up Arrow and Down Arrow keys enable the user to select settings in
the various displays and the system configuration menu.
At the system configuration menu, the Up Arrow and Down Arrow keys
enable the user to select various parameters, modes, and settings. These
settings are required to operate and control the system.
When the keypad is not locked (in display 1 and display 2), use the Up
Arrow and Down Arrow keys to adjust the screen brightness.
The Keypad Locked key disables all the controls on the front panel of the
controller, except for the Audio Paused/Reset key. After 15 seconds of inac-
tivity, the keypad locks, and the Keypad Locked LED illuminates to indicate
that the keys are locked.
Air –selects the air temperature mode
Skin–selects the skin temperature mode
Humidity (optional)–selects the humidity display
Oxygen (optional)–selects the oxygen display
A
B
C
D
Instructions for use Isolette 8000 plus SW 5.n