Dräger Isolette 8000 How To Clean

How to clean the
Dräger Isolette 8000 / 8000 plus
!
Please complete all cleaning practices according to your hospital's guidelines.
This document is for information purposes only. Refer to the instructions for use (User
Manual) of the device for full disassembly, cleaning and disinfecting instructions.
Prerequisites: There is no patient in the device.
Allow sufficient time for device to cool down before Reprocessing.
Clean with Disinfection Wipes (and machine wash where appropriate).
Please turn the page for assembly and disassembly instructions.
Ensure all surfaces are dry before using for therapy.
Perform Operational Checkout Procedure to make sure device operates correctly.
!
Only use disinfectants as listed in the instructions for use (User Manual).
Make sure no liquid penetrates into the device.
1. Follow Manufacturer's recommendations for dilution
(if appropriate), contact time, and all safety recommendations.
2. On appropriate surfaces specified in the User Manual (IfU)
Clean using an approved disinfecting agent. Do not spray on
surface of device, rather, on a cleaning wipe. Do not spray in the
impeller fan area.
3. After the appropriate contact time, wipe disinfectant using
a clean towel and water to remove residue.
4. Wipe dry on hood surface and other areas to prevent pooling
and/or smear marks.
5. Inspect all reprocessed components for damage or cracks
before reassembly.

Manufacturer:
Draeger Medical Systems, Inc.
3135 Quarry Road
Telford, PA 18969-1042, USA