Honeywell Performance Series User Manual page 186

Performance Series Network Video Recorder User Guide
For the IPv6 version IP address, the Preferred DNS and Alternate DNS shall be no
Note
more the 128 digits. They also cannot be left blank.
Configuring the Ports
Go to SETUP  NETWORK  PORTPORT. Make any changes to the Port settings, as
needed, and then click OK to save the settings.
Figure 12-38 Port Configuration Interface
Table 12-13 Network Port Configurations
Configuration
Max Connection
TCP Port
UDP Port
HTTPS Port
RTSP Port
POS Port
RTSP Format
The POS Port is only available for
Note HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/
HEN323*4/HEN321*4/HEN642*4/HEN643*4.
172
Description
The maximum Web connection for the same NVR. The value ranges
from 1 to 20. The default is 20.
The default is 37777. You can enter the actual port number, if
necessary.
The default is 37778. You can enter the actual port number, if
necessary.
Select a value between 1 and 65535. The default setting is 443.
The default is 554.
Select a value between 1 and 65535. The default setting is 38800.
A non-configurable field that shows the RTSP format.