Configuring System Settings - Honeywell Performance Series User Manual

Configuring System Settings

General Settings
Click General under SETTING to open the General settings configuration interface. Update
the general settings as required and click OK to save the settings.
Figure 12-89 General Settings Interface
Table 12-27 General Settings Configurations
Configuration
Device Name
Device No.
Language
Auto Logout
Navigation Bar
Authentication
Mode
Date and Time Settings
Click the Date & Time tab in the GENERAL configuration interface to open the Date & Time
configuration interface. Update the date and time settings as required and click OK to save
the settings.
Description
Enter a device name.
Enter an NVR number.
Select a GUI language from the drop-down list.
Note: You need to reboot the device/NVR to activate this change.
Set the length of time the NVR waits before logging out an inactive
user. Specify a time between 0 and 60 minutes. The default setting is
10 min.
Select the check box to display the live view toolbar on the live view
screen. Clear the check box to hide the live view toolbar.
Check to enable the authentication mode for using the keyboard. If the
authentication mode is not applicable to your keyboard, uncheck it.
Web Client Operation
215