Figure 12-27 HDD Interface
2. Refer to the following table to interpret the HDD information:
Table 12-6 HDD Information
Device Name
Physical Position
Free Space
Total Space
Status
S.M.A.R.T.
3. Click HDD Time to view the time information for the selected hard disk.
4. In the list of HDDs, double-click a HDD to view more details, if necessary.
Configuration
This chapter includes descriptions about how to configuring the following:
•
Camera setup
•
Network setup
•
Event settings
•
Storage
•
General settings, including the following:
•
the device's name and number
•
the interface language
•
the video standard
•
what happens when the HDD is full
•
the pack duration
Shows the name you have given the device.
Describes the hard drive bay where the hard drive is installed.
Indicates the amount of free space remaining on the HDD.
Indicates the total capacity of the HDD.
Indicates the operating status of the HDD.
Indicates S.M.A.R.T (Self-Monitoring, Analysis, and Reporting
Technology) status.
Web Client Operation
161