Honeywell Performance Series User Manual page 221

Select the check box to enable the playing of a voice prompt audio file
Voice Prompts when the alarm is detected. Use the File Name drop-down list to select
the audio file to play when the alarm is detected.
Click to enable a pop-up message on your local host PC screen to let
Show Message
you know an alarm has occurred.
The system can send an email when an alarm is detected. Go to
Send Email
NetworkEmail to configure the email settings.
Click to enable the Buzzer function. When an alarm occurs, the buzzer
Buzzer
beeps.
Select the check box to send a text message when alarm events are
Message detected. Go to Network3GMobile to configure messaging
settings.
Log Select the check box to enable logging of alarm events.
Configuring POS
This function is only available for
Note HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/HEN323*
4/HEN321*4/HEN642*4/HEN643*4.
Use the POS settings screen to setup a connection to a point of sales device, such as a cash
register, to enable POS info to be synchronized with video data.
1. Go to SETUPEVENTPOS, the following window is displayed.
Figure 12-79 POS Configuration Interface
2. Select a POS name in the Name dropdown list. Click
3. Select the Enable checkbox to enable the POS that you select in step 2.
Web Client Operation
to edit the name if you want.
207