Configuring Ptz Connection Settings; Configuring Ptz Functions - Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
Figure 3-8 Expanded PTZ Control Panel

Configuring PTZ Connection Settings

Before you can control a PTZ camera with the NVR, you must configure the PTZ connection
settings.
Note
To configure the PTZ connection settings
1. Go to Main Menu  SETTING  SYSTEM PTZ, the following window is displayed:
Figure 3-9 System Setting – PTZ
2. Configure the following settings:
Channel: Select the channel (camera) for which you want to configure PTZ settings.
PTZ Type: Select Remote for the PTZ type. A remotely connected IP camera is connected
through the network.
3. Click Apply, and then click OK to save your settings and exit.

Configuring PTZ Functions

32
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/
HEN323*4/HEN321*4/HEN642*4/HEN643*4.