Honeywell Performance Series User Manual page 235

PTZ Type
Configuring Voice Prompt Settings
Voice prompt files can be used as alarm audio and can be set as actions when events are
triggered.
Managing Voice Prompt Files
1. Click Voice Prompt under SYSTEM to open the File List configuration interface
Figure 12-97 Voice Prompt File List Configuration Interface
2. Click Select audio to search for and add a new audio file to the voice prompt file list.
3. If necessary, you can delete audio files by clicking the delete icon for that file.
4. Click OK to save your settings.
Configuring Voice Prompt Schedules
1. Click Schedule on the Voice Prompt screen to open the Schedule configuration interface
2. You can configure up to six schedule periods. Set the time range for each Period.
3. Select the file name to be played from the drop-down list.
Enter the number of times the voice prompt should repeat in the Repeat field and set the
4.
Interval between repetitions.
5. Select the audio device to play the voice prompt from the Output drop-down list.
6. Click OK to save the settings.
Configuring Accounts
Some Basic User and Group Rules
•
You can use up to 6 characters for user names and group names. You can not use a space
at the beginning or end of a name. You can use characters, numbers, and an underline (_).
•
You can add up to 64 users and 20 groups (these are also the default settings). The
default setting includes two group levels: user and admin. Configure the Group privileges,
and then assign users to their groups according to the privileges those users require.
Select Remote for the PTZ type. A remotely connected IP camera is
connected through the network.
Web Client Operation
221