Adding A Camera Manually - Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
a. Click to select the found camera.
b. Click Add to add the found device to the Added Device list.
If the NVR fails to display the model name of a found device,
Note click Device Search to rediscover the online devices. The model
name should appear in the Found Devices list.

Adding a Camera Manually

Click Manual Add and manually configure the following settings:
Table 6-1 Manual Add
Parameter
Manufacturer
IP Address
TCP Port
Username
Password
Channel No.
Remote
Channel No.
Channel
Decode buffer
Click OK. The newly added camera appears in the Added Device list.
54
Function
Select the manufacturer that applies to your camera from
the list.
Enter the IP address for the camera.
Enter the TCP port for the camera. (Optional)
Enter a username.
Enter a password
Enter a channel amount or click the Connect button to get
the channel amount of the remote device.
Note: We recommend click the Connect button to get
remote device channel amount, the manual add operation
may result in failure if the input channel amount is not
right.
After getting the remote device channel amount, click
Setup to select a channel.
Note: Click to select one or more remote channel numbers
here.
The local channel number you want to add. One channel
name has corresponding one channel number.
Select from the drop-down menu of options.