Honeywell Performance Series User Manual page 13

About This Document
This document introduces the Honeywell Performance Series Network Video Recorder. It
explains how to install and operate the Performance Series Network Video Recorder.
This document is intended for installers and users.
Overview of Contents
This document contains the following chapters and appendixes:
•
Chapter 1, Introduction, describes the front and rear panel layout of the NVR, and mouse
and remote control functions.
•
Chapter 2,
interface.
•
Chapter 3,
associated NVR operations, including controlling a PTZ camera (if connected).
•
Chapter 4,
up automatic recording.
•
Chapter 5,
and snapshots, and how to save recorded files to an external storage device.
•
Chapter 6,
settings, encoder settings, snapshot settings, privacy mask settings, camera name
settings, and channel type settings.
•
Chapter 7,
settings, including connection settings, email settings, FTP settings, registration settings,
and alarm center settings.
•
Chapter 8,
settings, including settings for motion detection, video loss, camera tampering, and
system events.
•
Chapter 9,
settings, including recording settings and HDD management settings.
•
Chapter 10,
display settings, and user accounts; export and import configuration settings to and from
other NVRs; restore default settings; and upgrade the system firmware.
•
Chapter 11,
information.
•
Chapter 12, Troubleshooting, lists troubleshooting steps for resolving errors that you may
encounter when operating the NVR.
•
Appendix A, Connecting Alarm
inputs and outputs.
Getting Started, describes how to connect the NVR and log on to its user
Viewing Live Video, describes the NVR's real-time monitoring mode and
Recording Video, describes how to manually record a video clip and how to set
Playing Back Video, describes how to search for and play back recorded video
Configuring Camera Settings, describes how to configure camera image
Configuring Network Settings, describes how to configure the NVR's network
Configuring Event Settings, describes how to configure the NVR's alarm
Configuring Storage Settings, describes how to configure the NVR's storage
Configuring System Settings, describes how to configure NVR system settings,
Viewing Information, describes how to view system, event, network, and log
Input/Outputs, provides guidelines for connecting alarm
xi