Honeywell Performance Series User Manual page 250

Performance Series Network Video Recorder User Guide
Figure 12-119 Alarm Interface
Table 12-34 Alarm Configurations
Configuration Configuration
Type
Motion
Detection
Local Alarm
Tampering
HDD Error
Video Loss
HDD Full
Alarm Type
Intelligent
Detect
Audio Detection
UserLock
Scene Change
236
Description
Click to enable Motion Detection. The system will then
trigger an alarm when motion is detected under the
specified circumstances.
Click to enable Local Alarm. The system triggers an alarm
when the NVR's local alarm is triggered.
Click to enable Tampering. The system triggers an alarm
when camera tampering occurs.
Click to enable the HDD Error alarm. The system triggers
an alarm when a hard disk error occurs.
Click to enable Video Loss. The system then an alarm when
video loss occurs.
Click to enable the HDD Full alarm. The system triggers an
alarm when the disk is full.
Click to enable the Intelligent Detect alarm. The system
triggers an alarm when an intelligent analytics event
occurs.
Click to enable the Audio Detection alarm. The system
triggers an alarm when an audio detection event occurs.
Click to enable the UserLock alarm. The system triggers an
alarm when a user has been detected of trying to illegally
access the unit.
Click to enable the Scene Change alarm. The system
triggers an alarm when the camera scene change event
occurs.