Configuring Switch Settings; Configuring P2P Settings - Honeywell Performance Series User Manual

Hide thumbs Also See for Performance Series:
Table of Contents

Advertisement

Configuring Switch Settings

Note
You can change the IP Address, Subnet Mask, and Default Gateway for setting the PoE switch
settings.
1. Go to Main Menu  Setting  NETWORK  Switch, the following window is displayed:
Figure 7-14 Network Switch Settings Window
2. Configure the following settings:
IP Address: Enter a new IP address.
Subnet Mask: Enter a new subnet mask.
Default Gateway: Enter a new default gateway.
3. Click Apply to save your settings.
4. If you want to save your settings and exit the SETTING menu, click OK.

Configuring P2P Settings

You can easily connect to the unit using a mobile device with the HonView Touch app using
the P2P screen. To use this option you will need the HonView Touch app downloaded,
installed, and have registered/created an account. When the app is setup, select to add a
device and use the camera to view the QR code on the P2P screen. The device's information
and connection will automatically be downloaded to the HonView Touch app and you can now
connect to the NVR using your mobile device.
1. Go to Main Menu  Setting  NETWORK  P2P, the following window is displayed:
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/HEN323*
4/HEN321*4/HEN642*4/HEN643*4/HEN041*3/HEN081*3/HEN16
1*3.
Configuring Network Settings
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents