Honeywell Performance Series User Manual page 234

Performance Series Network Video Recorder User Guide
Figure 12-95 WEB - RS232 Configuration Interface
Table 12-31 RS232 Web Configurations
Setting
Function
Baud Rate
Data Bit
Stop Bit
Parity
2. Make your selections, then click OK.
Configuring PTZ Settings
Before configuring PTZ, please ensure the following:
•
The PTZ and decoder are connected correctly, and that the decoder address setup is
correct.
•
That the correct decoder line is connected to the correct NVR line (A to A; B to B).
Click PTZ under SYSTEM to open the PTZ configuration interface
Figure 12-96 PTZ Configuration Interface
Table 12-32 PTZ Configuration Interface
Setting
Channel
220
Description
Select the corresponding dome Protocol. The default is Console.
Select the Baud Rate. The default is 115200.
Select from 5 to 8. The default is 8.
Choose either 1 or 2. The default is 1.
Select from None, Odd, Even, Space, or Mark. The default is None.
Description
Select a channel.