Download  Print this page

Honeywell Performance Series Configuration Manual

1080p hqa/tvi/ahd/cvbs pin-hole camera.
Hide thumbs
   

Advertisement

HPXD2 1080P HQA/TVI/AHD/CVBS Pin-hole
Camera
Configuration Guide
Follow the instructions in this guide to configure your camera.
Configuring Your Camera's Settings
When the camera is connected to a Performance Series HQA DVR, you can configure the
camera's settings using the camera's on-screen display (OSD) menu.
To configure the camera's settings:
1.
Connect the camera to a Honeywell Performance Series HQA DVR and log on as the
admin user.
2.
Right-click to display the shortcut menu, then click Camera Menu. The Menu Operation
window opens.
3.
Click Enter to display the camera's OSD menu.
4.
To configure the camera, in the Menu Operation window, click the up/down arrows to
move through the menu list, click the left/right arrows to change a menu setting, or click
Enter to enter a submenu (
) or execute a command.
5.
After you have finished configuring the camera, scroll down to Exit, and then click Enter
to exit the OSD menu. Right-click to close the Menu Operation window.
OSD Menu Tree
Note: When the VIDEO OUTPUT is set to CVBS, Korean, Chinese and Japanese are not available in Language
option.
1st Level
2nd Level
Format
NTSC
Confirm/Cancel
PAL
Confirm/Cancel
Video
1080p @30/25
Confirm/Cancel
Mode
720p@30/25
Confirm/Cancel
Backlight
OFF
Mode
HLC
LEVEL
BACK
BLC
LEVEL
AREA
DEFAULT
BACK
WDR
LEVEL
BACK
Image
SHARPNESS
Adjust
BRIGHTNESS
SATURATION
GAMMA
2DNR
3DNR
BACK
Exposure
MODE
LEVEL
GAIN
SLOW SHUTTER AUTO
BACK
3rd Level
1-100
BACK/SAVE
Middle/High/
Low
POSITION/SIZE
BACK/
AGAIN
BACK/SAVE
1-5
BACK/SAVE
0-10
1-80
0-100
USER/0.45/0.5/
0.55/0.6/0.65/
0.7/0.75/0.8/
0.85/0.9/0.95/1
LOW/MIDDLE/
HIGH/OFF
LOW/MIDDLE/
HIGH/OFF
BACK/SAVE
AUTO
MANUAL
SHUTTER
1/25(30);1/50(60);
1/120(100);
1/200(240);
1/400(480);
1/1000;1/2000;
1/5000;1/10000;
1/50000/
X2/X4/X6/X8/X10/
X15/X20/X25/X30
BACK
BACK/SAVE
1-80
1-15
SENS-UP
X2/X4X/X6/X8/X10/
X15/X20/X25/X30
OFF
BACK
BACK/SAVE
BACK/SAVE
4th Level

Advertisement

Table of Contents

   Summary of Contents for Honeywell Performance Series

  • Page 1 Middle/High/ Configuring Your Camera’s Settings AREA POSITION/SIZE BACK/ AGAIN When the camera is connected to a Performance Series HQA DVR, you can configure the DEFAULT camera’s settings using the camera’s on-screen display (OSD) menu. BACK BACK/SAVE LEVEL To configure the camera’s settings:...
  • Page 2 © 2018 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects.

This manual is also suitable for:

Hpxd2

Comments to this Manuals

Symbols: 0
Latest comments: