Table of Contents
Advertisement
Temperature selection
›››
Turn rotary control
Fig. 86
–
A
to increase the temperature.
Turn rotary control
anti-clockwise to re-
–
A
duce the temperature.
Blower selection
›››
Turn rotary control
Fig. 86
–
B
1 to 4 to switch the blower on.
Turn rotary control
to position 0 to
–
B
switch the blower off.
Heating selection
Recommended settings for the different modes:
Settings
Windscreen and side window de-
Clockwise as far as it will go
frost
Windscreen and side window de-
frost
Heat as quickly as possible
Clockwise as far as it will go
Mild heating
Fresh air mode - blower
Heating and air conditioning
Press button
–
page 90
to close the fresh air vent.
clockwise
Air distribution selection
Turn rotary control
–
the air vents
to activate.
All controls, except control
to position
be set to any intermediate position.
Leave the blower activated at all times to pre-
vent the windows from misting over.
Control position
A
B
3
Required temperature
2 or 3
3
Required temperature
2 or 3
Anti-clockwise as far as it
Required position
will go
›››
in Air recirculation on
1
›››
Fig. 86
to select
C
›››
page 88, Air vents
you wish
›››
Fig.
86, can
B
C
/
/
Note
If the system is set so that all of the air is
used to defrost the windows, no air is sup-
plied to the footwell area. This could limit
heating comfort.
Air vents 4
Button
1
Open and direct towards the
Do not switch on
side window
Open and direct towards the
Do not switch on
side window
Switch on briefly
Opening
Do not switch on
Opening
Do not switch on
Opening
»
89
Advertisement
Table of Contents
