Control Lamps - Seat Toledo 2015 Owner's Manual

Table of Contents

Advertisement

Trip counter*
Daily trip counter (trip)
The daily trip counter indicates the distance
that has been covered since the last time the
function was reset in 100 metre sections.
In order to reset the daily distance covered
›››
keep the button
Fig. 24
6
pressed down.
Odometer
The odometer indicates the total number of
kilometres (or mileage) that the vehicle has
covered until now.
Fault indication
In the event of a fault the word Error will be
permanently displayed on the informative
display. Please take the vehicle to a special-
ised Technical Service to solve this fault.
Note
In vehicles equipped with an informative dis-
play, if the indicator of the second speed in
mph or in kph are activated respectively, this
speed will be displayed in place of the odom-
eter.
32
Digital clock
The clock is set using the buttons
›››
›››
Fig. 24
Select the indication you want to change with
button
and make the adjustment with but-
5
ton
.
6
›››
page 30
In vehicles equipped with an informative dis-
play this can be reset from the menu, Time
›››
page
44.
Recommended gear display
Fig. 25
Recommended gear display.
The general instrument panel display indi-
cates the engaged gear
In order to optimally reduce the fuel con-
sumption, the recommended gear is dis-
played on the screen.
Operation
to
5
6
page
30.
›››
Fig.
25.
A
If the control unit analysis decides that a gear
change is required, an arrow appears on the
display
. This arrow can point up or down
A
indicating whether a lower or higher gear is
recommended.
Simultaneously, the gear currently engaged
is indicated
in the place of the recommen-
B
ded gear.
CAUTION
However, the driver is always responsible for
choosing the appropriate gear for each situa-
tion, (i.e. when overtaking).

Control lamps

Summary
The control lamps indicate certain functions
or faults that may be accompanied by an au-
dible warning.
When the ignition is switched on some of the
warning lamps illuminate for several seconds
for the purpose of the control systems of the
vehicle. These warning lamps must switch off
several seconds after the ignition is switched
on.
Handbrake
›››
page
33

Advertisement

Table of Contents
loading

Table of Contents