Changing fuses in the engine
compartment
Fig. 140
Battery: fuse cover (version 1).
Fuses and bulbs
Fig. 141
Battery: fuse cover (version 2).
●
Press the flexible tabs on the fuse box cov-
er in the direction indicated by the arrows
›››
Fig.
140.
Remove the cover by sliding it in the direc-
●
tion indicated by arrow
.
2
Use a flat-headed screwdriver to unlock the
●
holes
.
3
Open the cover in the direction indicated
●
by the arrow
.
4
Replacing a blown fuse
Image of a blown fuse
Fig. 142
Preparation
●
Switch off the ignition, lights and all elec-
trical equipment.
●
Open the corresponding fuse box
›››
page
164.
Identifying a blown fuse
A fuse is blown if its metal strip is ruptured
›››
Fig.
142.
Point a lamp at the fuse. This will make it
1
easier to see if the fuse is blown.
To replace a fuse
Remove the fuse.
●
●
Replace the blown fuse by one with an
identical amperage rating (same colour and
markings) and identical size
»
›››
.
165