Lifting The Vehicle - Seat Toledo 2015 Owner's Manual

Loosening wheel bolts
Fit the box spanner as far as it will go over
–
1)
the wheel bolt .
Grip the end of the box spanner and turn
–
the wheel bolt about one turn anti-clock-
›››
Fig. 124.
wise
Tightening wheel bolts
Fit the box spanner as far as it will go over
–
1)
the wheel bolt .
Grip the box spanner as close to the end as
–
possible and tighten the bolt firmly by turn-
ing clockwise.
WARNING
The wheel bolts should only be loosened
slightly (about one turn) before raising the
vehicle with the jack. Risk of accident!
Note
If the wheel bolt is very tight, it may be pos-
sible to loosen it by pushing down the end of
the box spanner carefully with your foot. Hold
on to the vehicle for support and take care
not to slip.
1) The corresponding adapter is required to unscrew
›››
or tighten the anti-theft wheel bolts

Lifting the vehicle

Changing a wheel: jack position
Fig. 125
points.
page 154.
Emergencies
Fig. 126 Fitting the jack.
To place the jack, locate the jacking point un-
der the door sill closest to the wheel to be
›››
changed Fig. 125. The jacking point is di-
rectly underneath the stamp on the door sill.
Turn the crank handle on the jack to wind it
–
up under the jacking point until its claw is
directly below the jacking point of the door
sill.
»
153