Seat Toledo 2015 Owner's Manual page 169

Double headlight bulbs
Main headlight bulbs.
Fig. 143
Installation position of double headlight
bulbs
Side lights
A
Main beam headlights
B
Dipped beam headlights
C
Turn signal lights
D
Daylight
E
Fuses and bulbs
Changing side light bulbs
Changing side light bulbs.
Fig. 144
Raise the bonnet.
–
›››
Remove the protective cover
–
›››
Remove the bulb holder Fig. 144
–
pulling it outwards.
Remove the bulb by pulling it out and fit
–
the new one.
Installation involves all of the above steps
–
in reverse sequence.
Fit the protective cover. Make sure that the
–
cover fits correctly on the housing during
operation.
Check whether the new bulb is working.
–
Changing main beam headlight bulbs
Changing main beam headlight
Fig. 145
bulbs.
Raise the bonnet.
–
Fig. 144.
Remove the protective cover.
–
by
1
Remove connector
–
outward.
Extract the bulb and fit the replacement so
–
that it fits correctly into the recess on the
reflector.
Installation involves all of the above steps
–
in reverse sequence.
Fit the protective cover. Make sure that the
–
cover fits correctly on the housing during
operation.
Check whether the new bulb is working.
–
›››
Fig. 145 by pulling
1
167