Position of the bulbs
›››
Fig. 156
Bulb function
Turn signals: PY21W NA LL
A
Side lights-brake lights: P21/5W
B
Side lights: P21/5W
C
Note
Check the condition of the seal. If damaged, a
replacement can be acquired from an Official
Service.
Fitting rear light
Fig. 157
Fit the tail light unit.
Fuses and bulbs
Fit the tail light unit.
Fig. 158
Make sure the connector is correctly in
–
place.
Press the rear light unit backwards (driving
–
direction) by fitting the fastenings into the
›››
rubber mountings
Fig. 157
Take the screwdriver or a Torx 20 key (T20)
–
from the vehicle tool kit and tighten (turn-
›››
ing clockwise
Fig.
158) the two retaining
screws that secure the front of the light.
Changing rear lights (in rear
lid)
Remove the bulb holder
Remove the cover from the boot lid.
Fig. 159
.
A
»
171