Seat Toledo 2015 Owner's Manual page 42

Operation
Multifunction display: controls.
Fig. 27
Multifunction steering wheel: con-
Fig. 28
trols.
The button to change the functions
›››
Fig. 27 and the button to delete the memo-
ry are located on the window wiper lever.
B
Selecting a memory
Depending on the equipment package:
40
Operation
Briefly press switch
–
er.
Briefly press the right-hand thumbwheel on
–
the multifunction steering wheel 
›››
Fig. 28.
Selecting functions
Depending on the equipment package:
Briefly press the rocker switch
–
up or down. This displays the multifunction
display functions in consecutive order on
the screen.
Turn the right-hand thumbwheel on the
–
multifunction steering wheel
This displays the multifunction display
functions in consecutive order on the
screen.
Resetting
Select the required memory.
–
Depending on the equipment package:
›››
Keep switch
–
B
pressed.
Keep the right-hand thumbwheel on the
–
A
multifunction steering wheel 
›››
Fig. 28 pressed.
This way the following values of the selected
memory are reset:
● the average fuel consumption
journey distance covered
●
›››
Fig. 27 on the lev- ● average speed
B
duration of the journey
●
1
Multifunction display data
Outside temperature
The display indicates the outside tempera-
ture.
›››
Fig. 27
A
At temperatures below +4 °C (+39°F), the
snowflake symbol is also displayed (frozen
road surface warning symbol) and an audible
warning is given. When rocker switch
›››
›››
Fig. 28.
1
hand thumbwheel
last function will be displayed.
Journey duration
The display shows the time you have covered
since the memory was last reset. If you wish
to measure the duration of a journey from a
specific moment, the memory must be de-
leted
Fig. 27 on the lever
The maximum time indicated by the two
memories is 19 hours 59 minutes or 99
hours and 59 minutes for vehicles fitted with
1
an informative display. The memory is reset if
this value is exceeded.
Fig. 27 on the lever is pressed or the right-
›››
Fig. 28
is turned, the
1
›››
page 40.
A