Table of Contents
Advertisement
Information system
Multi-function display* (on
board computer)
Introduction
The multifunction display can only be operat-
ed when the ignition is switched on. When
the ignition is switched on the last function
selected before it was switched off is dis-
played.
The multifunction display data is shown on
›››
›››
the screen
Fig. 26
page
39.
In vehicles fitted with an informative display
›››
page 43
the system can be adjusted so
that certain data is not shown.
WARNING
Always keep your attention on driving! As the
driver, you have the full responsibility for the
safety of traffic.
Note
If the second speed in mph (km/h) is dis-
●
played, the current speed in km/h (mph) is
not displayed on the screen.
Information system
Memory
Multifunction display.
Fig. 26
The multifunction display has two automatic
memories. The selected memory is displayed
›››
on the screen
Fig.
26.
The current journey data (memory 1) is al-
ways displayed when the number 1 appears
on the display. When number 2 appears on
the display, the total distance travelled is
shown (memory 2).
Depending on the equipment package, the
memory is selected by:
●
briefly pressing the
button on the lever
B
›››
›››
Fig. 27
page
40, or by
briefly pressing the right-hand thumbwheel
●
on the multifunction steering wheel
›››
Fig.
28.
Current journey memory (memory 1)
The current journey memory collects data
from the moment the ignition is switched on
until it is switched off. If the journey is contin-
ued within two hours of switching off the ig-
nition, the new values will be added to the
existing trip recorder memory. The memory
will automatically be deleted if the journey is
interrupted for more than 2 hours.
Total distance travelled memory (memory 2)
The total distance travelled memory collects
journey data from any number of individual
journeys up to a maximum of 19 hours and
59 minutes and 1999 km or until 99 hours
and 59 minutes and 9999 km in cars with an
informative display. The memory will auto-
matically be deleted if one of the named val-
ues is reached, resetting the data collected.
Unlike the current journey memory, this
memory is not deleted, even when the igni-
tion is switched off for more than 2 hours.
Note
After disconnecting the battery, all the values
stored in memories 1 and 2 are deleted.
1
39
Advertisement
Table of Contents
