Changing The Windscreen Wiper Blades - Seat Arona 2018 Owner's Manual

Note
The vehicles must not touch each other,
otherwise electricity could flow as soon as
the positive terminals are connected.
Changing the windscreen
wiper blades
Changing the wiper blades
Wipers in service position.
Fig. 80
The essentials
Changing the windscreen wiper blade.
Fig. 81
To change the blades it is necessary to move
the wipers from the rest position into the serv-
ice position.
Do not change the windscreen wipers when
out of the service position, as it could cause
paint to flake off the bonnet due to friction
with the windscreen wiper arm.
Service position (for changing wiper
blades)
Ensure that the wiper blades are not frozen.
●
Turn the ignition on and off and then (within
●
approximately 9 seconds) push the wind-
screen wiper lever down (short wipe). The
windscreen wipers will move to the service
›››
position Fig. 80.
Removing the wiper blade
Lift the windscreen wiper arm.
●
Press the securing tab down
●
Extract the wiper blade from the wiper arm.
●
Fitting the wiper blade
Insert the wiper blade onto the windscreen
●
wiper arm until it clicks into place.
Place the windscreen wiper arms to their
●
initial position.
Turn the ignition on, push the windscreen
●
wiper lever down (touch wipe) and then turn
the ignition off.
›››

and rear window wiper blades on
page 87

›››
›››
Fig. 81.
1
in Changing the windscreen
page 87
61