Otto Bock 4R10 Quickchange Instructions For Use Manual page 23

This product has been tested by the manufacturer with 3 million load cycles
according to ISO 10328. Depending on the patient's activity level, this cor­
responds to a service life of 2 to 3 years.
4 General safety instructions
CAUTION
Product contains a magnet
Influence on or damage to devices or items due to a strong magnetic field
► Keep the product away from devices and items that are sensitive to
magnetic fields.
CAUTION
Mechanical damage to the product
Risk of injury due to change in or loss of functionality
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readiness
for use.
► In case of changes in or loss of functionality, do not continue using the
product (see "Signs of changes in or loss of functionality during use" in
this section).
► Take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an altered
gait pattern, a change in the positioning of the prosthetic components relat­
ive to each other and by the development of noises.
5 Scope of delivery
The scope of delivery is shown in Figure
In the illustration, a reference number shown in bold stands for a package in
which the product components shown in the frame can be reordered.
Only product components with reference numbers in the illustration can be
reordered separately.
INFORMATION
After removing the 4X345 locking pin, the upper section and lower section
can be separated from each other. This requires force because magnets
are installed in the upper section.
1
on page 2.
23