Lan Settings; Sglan Setting; Setting Up Sglan Server - Siemens CIM Operating Manual

5.4.3

LAN settings

This page allows you to set the IP for CIM.
If you forget the password for login, you need to reset the CIM to factory setting (Page 18)
and log in with the default password.
5.4.4

SGLAN Setting

5.4.4.1

Setting up SGLAN server

This page allows you to set the CIM work as SGLAN server.
Note
To works as an SGLAN server, CIM must meet the following requirements:
• CIM can access the Internet through IPv4/IPv6
• The IPv4/IPv6 address assigned to SIM card by telecom operator can be accessed over the
Internet through IPv4/IPv6
• The SIM card in CIM supports sending and receiving short message if you set up SGLAN by
SMS
• The IP of the devices in SGLAN are in the same subnet and not conflict with each other
1. Enable "CIM as SGLAN Server".
2. Select the mode.
CIM
Operating Manual, 11/2022, A5E51250518-AC
Web-based configuration
5.4 Web pages
49