PRODEM PDS Series Operating Instructions Manual page 38

MAINTENANCE
EXTRAORDINARY MAINTENANCE
ADJUSTMENT AND REPLACEMENT OF PARTS SUBJECT TO WEAR
The paragraphs that follow describe the operations to be performed on the attachment when it is necessary
to adjust or replace components subject to wear (due to normal use when cutting materials).
ATTENTION!
Adjusting the belt of the attachment requires turning off the operating machine and wearing adequate
IPDs (gloves, goggles and suitable clothing).
Table components subject to adjustment and/or wear:
The table (Table 6.5.2) refers to all models currently in production. The components of the frame (A) are found
on the first drawing in the table, while for those of the movable jaw (Q), you must choose the drawing
corresponding to the model of attachment you have.
A Frame
B Primary lower blade
C Secondary lower blade
D Front blade
E Guide blade
F Primary shim
G Secondary shim
H Front shim
Guide shim
L
J Adjustment skid
K Guide screw
Adjustment screw
M
N Screw stop
P Fixing screw
Q Movable jaw
R Sliding surface
S Bushing
T Clutch block
U Anti-wear plate
V Piercing tip
X Secondary upper blade
Primary upper blade
Y
Z Tip blade
Table 6.5.2
38
www.prodem-attachments.com
Translated by the original