Maintenance - PRODEM PDS Series Operating Instructions Manual

Hydraulic hammer
Table of Contents

Advertisement

MAINTENANCE

ISOLATING THE ATTACHMENT
Before performing any type of maintenance and/or repairs, the attachment must be isolated from the
hydraulic power. The residual hydraulic pressure must be discharged by activating the opening and closing
controls of the attachment several times with the engine stopped and depressurizing the oil tank. The
intervention must be marked on the card in the cabin of the operating machine.
GENERAL INFORMATION
The maintenance required for this attachment is divided into:
Regular
Scheduled
Extraordinary
They include operations relative to lubrication, cleaning, adjustment, replacement, inspection, tightening, etc.
In performing maintenance and/or repairs, it is a good idea to follow these recommendations:
Before beginning work, display a card, "ATTACHMENT BEING MAINTAINED" in a visible position;
Do not use solvents or inflammable materials;
Take care not to spill lubricants;
When accessing parts of the attachment, use suitable means for the operations to be performed;
Do not climb on the components of the attachment because they were not designed to support persons;
When finished working, correctly replace and attach all the protections that were removed and/or
opened;
Carefully clean individual components with an appropriate degreaser and without using compressed air
(which just moves dirt around);
Determine the frequency of maintenance based on the specific need in relation to the production cycle of
the attachment;
Before putting the attachment in operation every day, the operator should visually check the general state
of its components and request maintenance if he notices strange noises or anomalous situations;
Check that the mechanical parts are always well lubricated (only those components that need
lubrication).
ATTENTION!
The manufacturer will not be liable for failure to follow the listed recommendations and any other use that
is different or not mentioned in these instructions.
32
Generic unskilled worker: an operator with no specific skills only capable of performing
simple duties on the instructions of a qualified technician.
www.prodem-attachments.com
Translated by the original

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents