PRODEM PDS Series Operating Instructions Manual page 33

MAINTENANCE
REGULAR MAINTENANCE
Regular maintenance includes inspections and controls to monitor the state of the attachment.
Regular Maintenance Table:
INTERVENTION
Visual inspection of the structure of the attachment to
find any anomalies (in particular, the mounting saddle
connections between the attachment and the operating
machine).
Check the play between the pins and bushings of the saddle
connection.
Check that there are no cracks in the welds.
Visual check of the cylinder, distributor, the tightness of the
fittings and the integrity of the hydraulic hoses.
Check the presence of the metal identification plate that
declares the conformity of the attachment and its principal
technical specifications.
Check the presence and condition of the stickers that
indicate situations of danger placed on the attachment.
Replace them if missing or deteriorated.
ATTENTION!
Failure to obey these requirements will release the manufacturer from any liability under the guarantee.
33
Generic unskilled worker: an operator with no specific skills only capable of performing
simple duties on the instructions of a qualified technician.
www.prodem-attachments.com
TIMING
Daily
Daily
Daily
Daily
Daily
Daily
STATE OF THE ATTACHMENT
Isolation for maintenance
Isolation for maintenance
Isolation for maintenance
Isolation for maintenance
Isolation for maintenance
Isolation for maintenance
Tab. 6.3.1
Translated by the original