Taking Out Of Service; Waste Disposal; Dismantling - PRODEM PDS Series Operating Instructions Manual

INSTALLATION

TAKING OUT OF SERVICE

On the occasion of long periods of inactivity, it is necessary to disconnect the hydraulic power from the
attachment.

WASTE DISPOSAL

The user is responsible for the correct disposal of the waste produced by the attachment in conformity with the
current law in the country of use.
Lubricants and replaced parts must be disposed of in conformity with the current law in the country of use of
the attachment.

DISMANTLING

At the time of dismantling, the plastic parts must be separated and sent to differentiated collection in
conformity with current law.
As for the metal mass of the attachment, it is sufficient to separate the steel pieces from those made of other
metals and alloys for their correct recycling by fusion.
31
www.prodem-attachments.com
Translated by the original