Sticker Position; Illumination; Vibrations; Noise - PRODEM PDS Series Operating Instructions Manual

ATTACHMENT
DESCRIPTION

ILLUMINATION

The illumination of the work area must conform to current law in the country where the attachment is being
used and, in any case, must provide good visibility at every point, not create dangerous reflections and allow
clear visibility of the controls and the entire work area up to the safety limits required for the projection of
objects. Since the attachment has no independent light sources, the environment must be provided with
general illumination such as to provide values from 250 to 400 lux at every point in the work area.

VIBRATIONS

There are no dangerous vibrations under conditions conforming to the instructions for correct use.

NOISE

The attachment does not produce noise (acoustic pollution).
Any sound measurements in the work area must be performed in conformity with the requirements of current
local law in the country of use.

STANDARD SUPPLY

The attachment is supplied completely with:
An instruction Manual for use and maintenance, including a Declaration of Conformity.
Identification plate with CE marking. (Fig. 1.2. 1 .)
23
www.prodem-attachments.com
Translated by the original