PRODEM PDS Series Operating Instructions Manual page 13

SAFETY
GENERAL INSTRUCTIONS
Functional check of the attachment;
A check of the state of the attachment;
A check of the seal and efficiency of the hydraulic system.
ATTENTION!
If anomalies are found, they must be eliminated before putting the attachment back into
If the person performing the check finds dangerous cracks or anomalies, he must notify the manufacturer of
the attachment in a timely manner.
Take the attachment out of service whenever operating anomalies occur and see to suitable checks and/or
repairs.
Make sure that there are no objects between the parts of the attachment.
After any maintenance service, check that there are no objects remaining between moving parts.
In any case, to guarantee the maximum safety when transporting the attachment it is FORBIDDEN:
To tamper with any part of the attachment;
Leaving moving parts unguarded;
Use attachment that is working but not with complete efficiency;
Modify the attachment to change its original use without explicit authorization from the manufacturer or
with assuming complete liability in conformity with directive 2006/42/CE (the Machine Directive);
Manually moving mobile parts in the absence of energy.
13
www.prodem-attachments.com
operation.
Translated by the original