PRODEM PDS Series Operating Instructions Manual page 28

INSTALLATION
CONNECTIONS
SPECIFIC CONNECTION TECHNIQUES
Attachment
Power
Rotation
Drainage
A B
B optional
3/8" 3/8"
S 16 (M24x1,5)
Gas Gas
3/4" 3/4"
S 25 (M36x2)
Gas Gas
1" SAE 1"
S 30 (M42x2)
6000 Gas
1"1/4 1"1/4
SAE SAE 1"1/4 Gas
6000 6000
1"1/2 1"1/2
SAE SAE 1"1/2 Gas
6000 6000
1"1/2 1"1/2
SAE SAE 1"1/2 Gas
6000 6000
The pressure and flow output by the operating machine must always be that prescribed for the attachment in
use (see Table 3.5. 1 Technical Data). If this is not the case, the system must be equipped with reduction valves
(contact the manufacturer of the operating machine or a specialized workshop).
Do not use the attachment without check that the pressure and oil flow of the operating machine are those
required.
Before using the attachment start the operating machine and slow put the hydraulic system under pressure to
avoid hammers, until the maximum operating pressure is set, which should conform to the specifications
shown on the identification plate of the attachment. With the motor at the minimum, open the attachment to
1/4 and close, open to half and close, open to 3/4 and close and, finally, open completely and close. Open
and close the attachment 5 or 6 times, check that there are no leaks along the hydraulic circuits.
ATTENTION!
Before using the attachment for demolition, bring it to an open space free of obstacles and without
persons in the range of action of the operating machine and perform several maneuvers empty to
familiarize yourself with the attachment.
At this point, the attachment can be used for work.
28
HYDRAULIC CONNECTIONS
A
A B
B optional
1/4" 1/4"
L 12 (M18x1.5)
Gas Gas
3/8" 3/8"
S 16 (M24x1.5)
Gas Gas
3/8" 3/8"
S 16 (M24x1.5)
Gas Gas
1/2" 1/2"
S 16 (M24x1.5)
Gas Gas
1/2" 1/2"
S 16 (M24x1.5)
Gas Gas
3/4" 3/4"
S 25 (M36x2)
Gas Gas
B
B
A
B optional
/ / /
/ / /
/ / /
1/4" 1/4"
L 12 (M18x1.5)
Gas Gas
1/4" 1/4"
L 12 (M18x1.5)
Gas Gas
1/2" 1/2"
S 16 (M24x1.5)
Gas Gas
www.prodem-attachments.com
Operating Machines
PDS Range
PDS 030R
PDS 050R - PDS 070R
PDS 120R
PDS 200R - PDS 250R
PDS 300R - PDS 400R
PDS 500R
PDS 550R
PDS 700R– PDS 900R
PDS 1600R
Table. 4.6.1
Translated by the original