PRODEM PDS Series Operating Instructions Manual page 12

SAFETY
GENERAL INSTRUCTIONS
The user may supplement the manufacturer's information with additional instructions that, obviously, do not
conflict with what is shown in the manual to contribute to the safe use of the attachment.
Anyone working on the attachment must pay attention to the clothing he is wearing.
Avoid the use of clothing with parts that could get snagged in the attachment;
Avoid wearing ties or other flapping articles of clothing;
Avoid wearing rings or bracelets that could catch ones hands in the components of the attachment.
When necessary, the manual will provide additional recommendations for preventive measures to taken by
the user, individual protection devices, helpful information for avoiding human errors and prohibitions against
reasonably foreseeable prohibited behaviors.
In any case, it is indispensable to follow the following instructions diligently:
It is absolutely forbidden to operate the attachment with the fixed protections dismounted;
It is absolutely forbidden to inhibit the safety devices installed on the attachment;
Washing must be performed with the hydraulic separation devices disconnected;
Do not modify any parts of the attachment;
The manufacturer will not be responsible for the consequences of malfunctions caused by a failure to
respect the above. We recommend requesting any modifications directly from the manufacturer.
IMPORTANT !
The manufacturer will not be liable for personal injury or damage caused by the attachment in the case
of:
Use of the attachment by inadequately trained personnel;
Improper use of the attachment;
Defects in the hydraulic power supply;
Incorrect installation;
Lack of the required maintenance;
Unauthorized service or modifications;
Use of replacement parts that are not original or not specific to the model;
A total or partial failure to follow the instructions provided;
Use contrary to specific national law;
Disasters or exceptional events.
CONTROLS AND CHECKS
Checks must be made by an expert; they must be visual and functional, with the purpose of guaranteeing
the safety of the attachment. They include:
A check of all the load-bearing structures, which must not have any cracks, breakage, damage,
deformation, corrosion, wear or alteration with respect to their original characteristics;
A check of all mechanical components;
A check of all the safety devices installed on the attachment;
A check of all connections with pins and screws;
12
www.prodem-attachments.com
Translated by the original