Purpose Of The Operation Instruction And - PRODEM PDS Series Operating Instructions Manual

INTRO
SECTION
PURPOSE OF THE OPERATION INSTRUCTION AND MAINTENANCE MANUAL
This Manual is an integral part of the attachment and its purpose is to provide all the information necessary for:
Correctly alerting the operators to safety problems;
Safely handling the packed and unpacked attachment;
The correct installation of the attachment;
In-depth knowledge of its operation and limits;
Its correct use in safe conditions;
Performing maintenance correctly and safely;
Safely dismantling the attachment in observance of rules protecting worker health and the environment.
Under current law, the persons responsible for using this attachment are obligated to read the contents
of this document carefully and to have the operators and maintenance technicians read the parts
within their competence. You will be amply rewarded for the time spent through the safe and correct
operation of the attachment.
This document assumes that current laws regarding safety and occupational hygiene are observed in the
places where the attachment is to be used. The instructions, drawings and documentation contained in
this Manual are of confidential technical nature and may not be reproduced in whole or in part.
The limits of this Manual are:
The Manual can never be a substitute for an adequately experienced user;
For particularly demanding operations, the Manual can only provide a summary of the main steps.
The Manual is to be considered a part of the attachment and must be preserved for future reference until
the latter's final dismantling. The Manual must be available for consultation in the vicinity of the operating
machine and correctly preserved. This Manual reflects the machine's technical state at the time it was sold
and cannot be considered inadequate only because it was later updated based on new experience. The
maker reserves the right to update its production and Manuals without any obligation to update previous
production and Manuals.
The PRODEM Group will not be liable in the following cases:
Improper use of the attachment;
Use contrary to specific national law;
Incorrect installation (in the case where the attachment was installed by unauthorized personnel);
Power supply defects;
Serious failures to perform the required maintenance;
Unauthorized service of modifications;
Use of replacement parts or materials not specific to the model;
A total or partial failure to follow the instructions provided;
Use of the attachment with an incompatible machine;
Exceptional events.
3
www.prodem-attachments.com
Translated by the original