Permitted Uses; Prohibited Uses; Environmental Conditions - PRODEM PDS Series Operating Instructions Manual

ATTACHMENT
DESCRIPTION
PERMITTED USE
The attachment described in this Manual was designed to be mounted and used on earthmoving machines
(consult the chapter Technical Data for the type). The attachment must be used to cut and separate ferrous
materials and metal structures with characteristics similar to what is described in the chapter, Technical Data.

PROHIBITED USES

This attachment is exclusively intended for professional use. It is absolutely prohibited for anyone to use the
attachment for any purpose other than that expressly allowed and documented. Any improper use of the
latter will relieve the manufacturer from any liability for personal or property damage and will void any
guarantees. The attachment must always be used in the manner and at the times and places required by
good practice and in conformity with the current laws of every country, even if there are no laws regulating
the sector in the country of use.
The attachment must not be used:
For any purpose other than those explained in 3.2 or not mentioned in this Manual;
In an explosive or corrosive atmosphere or where there are high concentrations of dust or oily substances
suspended in the air;
In an atmosphere where there is a risk of fire;
With safety devices excluded or not working.

ENVIRONMENTAL CONDITIONS

The attachment does not require any particular environmental conditions.
ATTENTION!
The attachment is not suitable for use in explosive or corrosive atmospheres.
The attachment is suitable for operating in environments that are:
At altitudes no higher than 3,000 m above sea level;
At temperatures between -20 °C and +50 °C with an average temperature around 25 °C;
At relative humidity between 30% and 95%.
It is forbidden to use the attachment in environments that have:
A corrosive atmosphere;
A risk of fire;
An explosive atmosphere.
21
1st level machine operator: an operator with no specific skills, only capable of performing
simple duties, i.e., operating the machine through the use of the buttons on the
pushbutton pad and loading and unloading the materials used during production with
the protections installed and active; not qualified to use the machine in jog mode.
www.prodem-attachments.com
Translated by the original