•
Appendix A, "Technical Specifications," provides technical specifications.
•
Appendix B, "Command Reference," describes the Cisco IOS commands that are used
with the ATM modules.
•
Appendix C, "Configuration Examples," provides examples of the process of
configuring LANE servers and clients and configuring support for RFC-1483
permanent virtual connections (PVCs).
•
Appendix D, "Translated Safety Warnings," provides translations of the safety warnings
that appear in this manual.
Conventions Used in This Guide
This manual uses the following conventions:
•
The caret character (^) represents the Control key.
For example, the key combinations ^D and Ctrl-D are equivalent; both mean you should
hold down the Control key while pressing the D key. Keys are indicated in capital letters,
but are not case sensitive.
•
A character string is defined as a nonquoted set of characters.
For example, when setting an SNMP community string to "public," do not use quotation
marks around the string; otherwise, the string includes the quotation marks.
Command descriptions use these conventions:
•
Commands and keywords are in boldface.
•
Arguments for which you supply values are in italic.
•
Optional elements are shown in square brackets ([ ]); alternative optional elements are
separated by vertical bars ( | ).
•
Alternative but required elements are grouped in braces ({ }) and separated by vertical
bars ( | ).
Conventions Used in This Guide
About This Guide ix