Configuration Example Assumptions - Cisco Catalyst 2900 XL Series Installation And Configuration Manual

LANE Configuration Example
Figure C-1
Catalyst 5000 switch
with ATM module
LECS on ATM interface 0

Configuration Example Assumptions

The following assumptions apply to the LANE configuration example in Figure C-1:
•
The Enterprise Edition Software is running on the 2924M XL switch.
•
The LightStream 1010 ATM switch default ATM Network Service Access Point
(NSAP) prefix is 39.000000000000000000000000.
•
The Catalyst 5000 switch has an ATM module installed in Slot 3.
•
The Catalyst 5000 switch runs the LECS on ATM interface 0.
•
The Catalyst 5000 switch runs the LEC BUS and LES on ATM interface 0.1 for the
emulated LAN default.
•
The Catalyst 5000 switch runs the LEC BUS and LES on ATM interface 0.2 for the
emulated LAN engineering.
•
The 2924M XL switch has an ATM module installed in Slot A.
•
The 2924M XL switch runs the LEC on ATM interface 1.1 for the emulated LAN
default.
C-2
Catalyst 2900 Series XL ATM Modules Installation and Configuration Guide
LANE Configuration Example
LightStream 1010
ATM switch
BUS, LES, LEC on ATM interface 1.1 and 1.2
ATM NSAP prefix is
39.000000000000000000000000
Catalyst 2924M XL switch
with ATM module
LEC on ATM interface 1.1 and 1.2