Cisco Catalyst 2900 XL Series Installation And Configuration Manual page 80

Supported Cisco IOS Commands
Table B-2
Command
terminal history
terminal length
terminal monitor
terminal terminal-type
terminal width
undebug
write erase
write memory
write terminal
1. Type indicates whether the command is a switch command or an ATM-specific command. ATM commands
include Interface, Configuration, ATM, and LAN emulation commands.
2. Mode indicates whether a switch command is "Normal" or "Privileged" and whether an ATM command is an
interface configuration, privileged, EXEC, global configuration, all ATM, or line command.
B-24
Catalyst 2900 Series XL ATM Modules Installation and Configuration Guide
Supported Cisco IOS Commands (Continued)
Description
Enables the command history
feature for the current
terminal session or changes
the size of the command
history buffer for the current
terminal session.
Sets number of lines on a
screen.
Copies debug output to the
current terminal line.
Sets the terminal type.
Sets width of the display
terminal.
Disables debugging functions.
Erases the configuration
information in NVRAM.
Restarts the configuration
information stored in
NVRAM.
See show running_config
command.
1 2
Type Mode
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/Conf EXEC
IOS/Conf EXEC
IOS/Conf EXEC