Cisco Catalyst 2900 XL Series Installation And Configuration Manual page 76

Supported Cisco IOS Commands
Table B-2
Command
show atm interface atm
show atm traffic
show atm vc
show buffers
show configuration
show controllers
show controller address-table
show controller atm
show controller eth
show controller mem
show controller relay
show controller rfc
B-20
Catalyst 2900 Series XL ATM Modules Installation and Configuration Guide
Supported Cisco IOS Commands (Continued)
Description
Displays ATM-specific
information about an ATM
interface.
Displays current global ATM
traffic to and from all ATM
networks connected to the
switch.
Displays all active ATM
virtual connections (PVCs
and SVCs) and traffic
information.
Displays statistics for the
buffer pools on the network
server.
Displays contents of
nonvolatile memory.
Displays the interface
controller status.
Shows the address table
entries.
Shows the ATM segmentation
and reassembly (SAR)
counters.
Displays the MAC counters.
Displays the memory buffer
pools.
Displays the Ethernet-to-ATM
and ATM-to-Ethernet relay
counters.
Displays the RFC-1483
counters.
1 2
Type Mode
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC