Cisco Catalyst 2900 XL Series Installation And Configuration Manual page 64

CLI Command Modes
at the prompt.
ATM(config-line)# ?
Line configuration commands:
ATM(config-line)#
To exit line configuration mode and return to global configuration mode, use the exit
command. To exit line configuration mode and return to privileged EXEC mode, enter the
end command, or press Ctrl-Z.
B-8
Catalyst 2900 Series XL ATM Modules Installation and Configuration Guide
autocommand
editing
escape-character
exec-banner
exec-timeout
exit
full-help
help
history
length
location
logging
login
monitor
motd-banner
no
notify
padding
password
privilege
refuse-message
session-timeout
terminal-type
vacant-message
width
Automatically execute an EXEC command
Enable command line editing
Change the current line's escape character
Enable the display of the EXEC banner
Set the EXEC timeout
Exit from line configuration mode
Provide help to unprivileged user
Description of the interactive help system
Enable and control the command historyfunction
Set number of lines on a screen
Enter terminal location description
Modify message logging facilities
Enable password checking
Copy debug output to the current terminal line
Enable the display of the MOTD banner
Negate a command or set its defaults
Inform users of output from concurrentsessions
Set padding for a specified output character
Set a password
Change privilege level for line
Define a refuse banner
Set interval for closing connection when there
is no input traffic
Set the terminal type
Define a vacant banner
Set width of the display terminal