Line-Board Information (Eeprom) - Raisecom RC3000 User Manual

www.raisecom.com
Display of 2E1 Line-Board:
2E1 Line-Board:
2E1 with ADM function:
4E1 line-board:
For the line-board have not been named, showing as:
A.4.3 Line-Board information (EEPROM)
In device set query menu press number key 3, and then there will be device Line-Board information:
Ether Net E-Port: Open
Auto negotiation: Enable
Ethernet status: 100M Full-duplex
Send Limited Bandwidth:1200 x 32Kbps
Receive Limited Bandwidth:1200 x 32Kbps
Line-Board Type:Optical Board + 2E1
Software Version:REV 1.0
Optical Module Type: AS1
Alarm Mask: 1=Mask Optical LOS| Frame LOF | E-3 ERROR | E-6 ERROR
Local:
Remote:
Local:
Remote:
Loopback State: no loop
Line-Board Type: 2E1 line-board
PCB Version: REV A.3
Line-Board Type: 2E1 ADM line-board
PCB Version: REV A.3
Line-Board Type: 4E1 line-board
PCB Version: REV A.3
Line-Board Type: without name
：
Mode 1 0 0 0 0 0 0 0 0
：
Mode 3 0 0 0 0 0 0 0 0
：
Mode 5 0 0 0 0 0 0 0 0
：
Mode 7 0 0 0 0 0 0 0 0
：
Status 1 0 0 0 0 0 0 0 0
：
Status 3 0 0 0 0 0 0 0 0
：
Status 5 0 0 0 0 0 0 0 0
Link State: Link Up
AUTO_MDI/MDIX: Disable
PCB Version:REV @.1
0 0
0 0
3E1 without signal | 4E1 without signal
0 0
0 0
：
Mode 2 0 0 0 0 0 0 0 0
：
Mode 4 0 0 0 0 0 0 0 0
：
Mode 6 0 0 0 0 0 0 0 0
：
Status 2 0 0 0 0 0 0 0 0
：
Status 4 0 0 0 0 0 0 0 0
User Manual
0 0
0 0
52