Table of Contents
Advertisement
www.raisecom.com
Please refer to Line-Board information (RAM) for Line-Board information explanation.
A.4.4 E1 using and mode information
In device set query menu press number key 4, and there will be E1 using and mode information:
There are two parts information, one is the information saved in RAM and the other part is the
information saved in EEPROM.
A.4.5 Clock, CRC and Net information, version setting:
In device set query menu press number key 5, and there will be E1 using and mode information:
EEPROM Set:
Line-Board Type:2E1 Board
Device Query Command:1-8, Menu Display: M, Return: Q
E1:
Real information:
Use: 1=Using
Mode: 1=PCM31
Mask: 1=Mask
APS: Enable
EEPROM Set:
Use:1=Using
Mode:1=PCM31
Mask:1=Mask
APS: Enable
Device Query Command: 1-8, Menu Display: M, Return: Q
Real information:
Clock Mode:
Net Topology:
Net Using Time Slot: 0 Time Slot
CRC Transmit:
Alarm Sound Output:
Work mode of VER A: Enable
10-line mode setting: enable
EEPROM information:
Clock Mode:
Net Topology:
Net Using Time Slot: 0 Time Slot
First
Second
1
1
0
0
1
1
1
1
0
0
1
1
0
Master Clock
Auto
Three E1 Direction
Enable
Enable
Master Clock
Auto
Three E1 Direction
Command:
Third
Fourth
1
0
0
0
0
0
1
0
0
0
0
Command:
User Manual
53
Advertisement
Table of Contents
