Nuova Simonelli Talento Service Manual page 94

9.2.2 NOZZLE
To access the pouring nozzle, the engineer will
need to:
1 Switch off the machine.
2 Unhook the plastic cover of the pouring noz-
zle moving up the metal lock.
The pouring nozzle contains:
A Milk diffuser
B Pipe for coffee (Blue)
C Pipe to add hot water (Teflon)
To remove the pouring nozzle, the engineer will
have to:
3 Press the clip at the back.
4 Release the pouring nozzle from it's original
position.
9.2.3 COMPRESSOR, SOLENOID
VALVE AND REGULATOR FOR
COLD MILK
To access the milk pump, the engineer will need to:
1 Switch off the machine.
2 Remove the grounds drawer.
3 Turn the key anticlockwise.
4 Open the front panel.
Then remove the coffee containers:
5 Block the two tabs closing the containers .
6 Remove the containers and open the top
panel.
7 Remove the four Phillips head screw on the
top panel.
8 Disconnect the wiring.
9.8
SERVICE MANUAL
Fig. 21
Fig. 22
Fig. 23
Fig. 24
7
2
A
B
C
3
1
4
2
7
Edition 02 to 12/2013
7
7